Details

• Brand:

  

  

• SKU:

  MB3Z-19712-E

• Other Names:

  Condenser, Condenser Assembly

• Description:

  This genuine Ford A/C condenser is the heat-exchange core of the air conditioning system on the 2024-2025 Ford Ranger, mounting ahead of the radiator where it sheds heat from the high-pressure refrigerant so it condenses from a hot gas back into a liquid before reaching the expansion valve and evaporator. As the front-most cooling component it is directly exposed to road debris, stones, and salt spray, and its thin aluminum tubes and fins are a common failure point. Drivers who need this part are typically experiencing warm or intermittent air from the vents, reduced cooling on hot days, refrigerant leaks traced to a punctured or corroded condenser, or a system that will not hold a charge after a front-end impact. Replacing a compromised condenser restores full refrigerant flow and proper cabin cooling and prevents contamination or oil starvation that can damage the compressor. This is the correct OEM condenser assembly for the current-generation Ranger and matches the factory fit, port locations, and mounting points, so no modification is required. Because the sealed refrigerant circuit must be opened for installation, the system should be recovered and evacuated beforehand and recharged to the specified refrigerant capacity afterward, and the desiccant or receiver-drier serviced per Ford guidance whenever the system is opened. Installing a genuine part ensures correct cooling capacity and reliable sealing at the line fittings.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov