Details

• Brand:

  

  

• SKU:

  MB3Z-3078-C

• Positions: Right, Front Right Lower Right
• Other Names:

  Arm Assembly Front Suspension

• Description:

  This genuine Ford front lower control arm is the passenger-side (right-hand) suspension arm for the 2024-2025 Ford Ranger, locating the bottom of the front wheel and allowing it to travel up and down while holding wheel alignment under braking, cornering, and load. It carries the pivot bushings at the frame and the ball joint at the knuckle, so it directly influences steering precision, tire wear, and ride stability. When the bushings crack or the ball joint wears, the truck develops clunks over bumps, wandering or loose steering, uneven or accelerated tire wear, and sometimes a popping sound during turns or when the suspension loads and unloads. Owners searching for this part are usually reacting to those symptoms or to a failed inspection that flagged play in the ball joint or torn bushings. This arm is supplied as a complete assembly with the ball joint and bushings already installed, so it replaces the worn unit as a single service part and restores correct geometry. Front suspension and axle fasteners on this design are frequently torque-to-yield or single-use; any stretch-type bolts and the axle or ball-joint nuts disturbed during removal should be replaced rather than reused, and all fasteners must be tightened to Ford's specified torque. A front wheel alignment is required after installation to reset caster, camber, and toe. This is the right-side arm; the left-side unit carries a different part number.

• Notes: Includes Bushings. Part has related components that cannot be reused/reinstalled. adjust bolt and nut.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov