Details

• Brand:

  

  

• SKU:

  N1WZ-2629164-HAPTM

• Positions: Front Right, Right
• Other Names:

  Wheel Arch Molding, Molding

• Description:

  This genuine Ford wheel opening molding trims the passenger side wheel arch on the 2024-2025 Ford Ranger, covering the raw sheet metal edge around the fender opening and protecting it from stone chips and road debris kicked up by the tire. It fits Ranger trucks built with the 2.3L EcoBoost four-cylinder, 2.7L EcoBoost V6, or 3.0L EcoBoost V6 engine, since the molding attaches to the shared fender panel across all three engine choices. Owners search for a replacement after the original molding cracks, fades, or pulls loose from its retaining clips following a curb strike, gravel impact, or years of UV exposure, leaving a gap where water and dirt can reach the fender edge and promote corrosion. This molding ships primed rather than finished in body color, so it must be painted to match the vehicle before or immediately after installation to prevent the primer surface from weathering and to keep the wheel arch looking factory-correct. It mounts to the passenger side only; the driver side uses a separate mirrored part. Installation involves removing the factory retaining clips and pressing the new molding into place along the wheel arch lip. No core charge or module programming applies to this trim piece, making it a simple cosmetic and protective refresh for the front or rear wheel opening.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov