Details

• Brand:

  

  

• SKU:

  PW-512

• Other Names:

  Motorcraft™ Water Pump, Pump Assembly Water

• Description:

  This is the genuine Ford Motorcraft engine water pump for 1997 through 2008 F-150 pickups with the 4.2L Essex V6, including the 2004 Heritage body along with related Mark LT and E-Series applications, supplied as a complete pump assembly. The belt-driven pump circulates coolant through the block, cylinder heads, and radiator to carry off engine heat and keep the V6 at its designed operating temperature under load and towing. As a full assembly it provides a new impeller, bearing, shaft, and seal on the correct flange, so pulley alignment and sealing surfaces match the factory pump. A buyer searching for this part is generally dealing with a coolant leak from the weep hole, a growling or rough pump bearing, a wobbling pulley, coolant collecting at the front of the engine, or an overheating condition. Swapping in the correct OEM Motorcraft pump restores full coolant flow and helps prevent the overheating that can damage the engine. To install, drain the cooling system, remove the accessory drive belt, clean the mounting surface completely, install the new pump with a fresh gasket, and torque the bolts in the specified pattern, then refill with the correct Ford coolant, bleed the system, and check for leaks and proper temperature. Confirm the engine is the 4.2L V6 before ordering, as the water pump is engine-specific and does not interchange with the modular V8 pumps used in other F-150s of this period.

• Applications: F150 NEW STYLE 2004-08, MARK LT. F150 1997-03, HERITAGE 2004 (4.2L).

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov