Details

• Brand:

  

  

• SKU:

  YC3Z-6619-BA

• Other Names:

  Gasket

• Description:

  This is a genuine Ford YC3Z-6619-BA high-pressure oil pump reservoir gasket, the original-equipment seal with integral filter screen that fits between the HPOP reservoir and the front cover on the 7.3L Power Stroke diesel in Ford Super Duty, Excursion, and E-Series applications built from the 1999.5 production change through 03. The gasket seals the reservoir to the front cover and its screen filters oil entering the high-pressure system, which supplies the pressurized oil that actuates the injectors. Technicians need this gasket when servicing the HPOP or reservoir, and when a leaking or deteriorated gasket causes oil seepage at the reservoir or contributes to hard starting and injector actuation problems. Installing the correct Ford gasket restores a proper seal and the filtering screen the system relies on. Because this is the OEM gasket, its shape, screen, and bolt pattern match the reservoir and front cover exactly, so it locates correctly and seals evenly. A critical caution applies here: do not install a screened gasket in place of a non-screened design or the reservoir can be damaged, so verify which gasket your engine's reservoir requires before installation, particularly on early 99 units. Always replace this gasket rather than reusing it during service and clean the sealing surfaces. Confirm your engine build date and reservoir style before ordering. This Ford HPOP reservoir gasket returns the high-pressure oil system to a sealed, properly filtered factory condition.

• Applications: 7.3L DI DIESEL.
• Replaces:

  YC3Z6619AA

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov