Details

• Brand:

  

  

• SKU:

  XW4Z-9276-AA

• Positions: Left
• Other Names:

  Gasket, Fuel Pump Tank Seal, Fuel Sender Unit Gasket, CG801

• Description:

  This is a genuine Ford fuel sending unit gasket, also called a fuel pump tank seal, used across Escape, Focus, Freestar, Lincoln LS, and related applications. The seal sits between the fuel tank flange and the fuel pump or sending unit module, sealing the opening so fuel and fuel vapor are contained inside the tank and so dirt and water are kept out of the tank and pump. As part of the evaporative emissions system it keeps the tank sealed at the module flange. Owners replace this seal whenever the fuel pump or sending unit is removed for service, since the original is usually distorted once disturbed, and when chasing a fuel smell, seepage at the tank top, or an evaporative fault traced to the module flange. A hardened, cracked, or reused seal can leak fuel and vapor and allow contamination into the tank. Built to Ford specifications, the seal provides the correct diameter and material to seat in the factory tank opening without modification, and it is intended for single use. Because this seal is shared across several car, van, and SUV applications, confirm it matches your tank and module before ordering. Clean the tank flange of old material and debris, and fit a fresh seal each time the module is removed so the connection seals reliably.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov