Details

• Brand:

  

  

• SKU:

  XL5Z-1022153-AA

• Positions: Front Left, Left, Front Left Outer
• Other Names:

  Handle Rod, Control Rod, Rod

• Description:

  This is a genuine Ford door lock operating rod, the metal linkage rod that connects the outside door handle and lock hardware to the latch mechanism inside the front door of the Ranger. When you pull the exterior handle or turn the key, this rod transfers that motion to the latch so the door releases or locks correctly. It fits 1999-2011 Ford Ranger front doors as part of the door lock and handle hardware. Buyers usually need this rod when the original has bent, corroded, popped off its retaining clip, or worn at the connection points, leaving the outside handle feeling loose, disconnected, or unable to open or secure the door. A missing or damaged operating rod is a common cause of a door that will not open from outside, a handle that moves with no effect, or intermittent latching. Fitting a genuine Ford rod restores the correct length and clip geometry so the handle-to-latch linkage operates crisply and reliably. It is formed to factory dimensions for a direct fit in place of the worn original. Access is through the door trim panel and vapor barrier; inspect the plastic retaining clips and handle bushings while the door is open and replace any that are brittle so the repaired linkage seats securely and does not disconnect again. Confirm front-door application for your Ranger before ordering.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov