Details

• Brand:

  

  

• SKU:

  F81Z-5484-MA

• Positions: Rear, Left, Right
• Other Names:

  Stabilizer Bar Insulator, Bushings, Bush

• Description:

  This genuine Ford part F81Z-5484-MA is a front stabilizer bar insulator, commonly called a sway bar bushing, used on Ford F-250, F-350, F-450, and F-550 Super Duty trucks across a long production run from 1999 onward. The bushing is a molded component that wraps around the front stabilizer or anti-roll bar where it passes through the mounting brackets on the frame; it lets the bar rotate while holding it in place, allowing the stabilizer bar to resist body roll and keep the truck flat and stable through corners and under load. As the bushing ages it hardens, cracks, or wears oversize, and a worn stabilizer bar bushing produces symptoms such as a clunk or rattle from the front end over bumps and during turns, a loose or wandering feel in the steering, and increased body lean in corners. Because the bushing is inexpensive and its failure mimics worn links or joints, it is a common first item to inspect when chasing front-end noise. Installing this genuine Ford insulator restores tight, quiet stabilizer bar control. Replace bushings in matched pairs across the axle for even handling, confirm the correct bar diameter for your application, and torque the stabilizer bar bracket fasteners to Ford specification during installation. This genuine Ford stabilizer bar insulator is manufactured to the original equipment material and inside-diameter dimensions for a correct fit on the Super Duty front stabilizer bar.

• Notes: Order By Model.
• Applications: 1999-07 SUPER DUTY.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov