Details

• Brand:

  

  

• SKU:

  W716238-S442

• Positions: Lower
• Other Names:

  Torque Arm Bolt, Trans Mount Bolt, Lower Trans Mount Bolt, Bolt

• Description:

  This is a genuine Ford transmission mount bolt, an M12 by 64 millimeter bolt built on the HB1 base used at transmission mount and engine torque strut locations. Ford dealer catalogs list it under several names including Transmission Mount Bolt, Trans Mount Bolt, and Engine Torque Strut Mount Bolt, all referring to the same fastener. It clamps the transmission mount or torque strut firmly to its bracket and the body so the powertrain stays located and isolated, resisting movement under torque while the soft mount controls vibration. You will find it used across a range of Ford and Lincoln applications including C-Max, Escape, Focus, and MKC across engines such as 1.5L, 1.6L, 2.0L, 2.0L turbo, 2.3L, and 2.5L, with applications spanning a broad range of model years. These are representative examples rather than a complete list, since Ford shares this hardware across these engine and transmission families. A loose, missing, or corroded transmission mount bolt lets the mount or strut shift, which causes powertrain movement, clunking or banging on acceleration and gear changes, driveline vibration felt through the body, and accelerated mount wear. Because mounting hardware is torque-sensitive and affects how the powertrain is held in the chassis, always install this bolt correctly and torque it to the Ford specification, and replace it if it shows wear or corrosion. Confirm the correct bolt for your specific vehicle and engine against your VIN before ordering, since mounting hardware varies by application.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov