Details

• Brand:

  

  

• SKU:

  W715732-S434

• Other Names:

  Washer

• Description:

  This is a genuine Ford turbocharger washer, a hardened washer built on the HW1 base that is used with turbocharger mounting hardware. Ford dealer catalogs list it as a Turbocharger Washer, and it appears in the turbocharger assembly diagrams as the washer that seats under a bolt or nut to spread clamp load across the turbo mounting flange or bracket. By distributing the clamping force across a wider area, it protects the mating surface and helps the joint stay tight under the high heat and vibration of the turbocharger system. You will find this washer used on Ford applications including Edge and Explorer fitted with the 2.0L EcoBoost engine, with model years spanning roughly the early 2010s into the mid 2010s. These are representative examples rather than a complete list, since Ford shares this hardware across turbocharged applications. A missing, deformed, or corroded turbocharger washer lets the related fastener lose clamp load, which can allow the turbo mount to loosen and lead to exhaust or boost leaks, ticking noises, and accelerated wear at the mounting flange. Because this is a high-temperature component used in the turbocharger system, it is typically replaced along with the related hardware whenever the turbo is serviced. Confirm the correct washer for your specific vehicle and engine against your VIN before ordering, since turbocharger hardware varies by application.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov