Details

• Brand:

  

  

• SKU:

  W711843-S439

• Other Names:

  Bracket Bolt, Bolt

• Description:

  This is a genuine Ford bolt cataloged as an engine torque strut, or torque arm, mount bolt. It is documented on the Ford Edge and the related Lincoln MKX where it secures the engine torque strut to the body and powertrain on transverse 2.0L and related four-cylinder and V6 layouts across multiple model years. The torque strut limits engine rock under acceleration and braking, and this bolt clamps the strut bracket so the engine is held precisely against the loads it transmits through the mount. A loose, corroded or stretched torque strut bolt lets the engine shift more than the design allows, which a driver typically notices as a clunk on throttle tip-in, a thump when shifting between drive and reverse, or increased vibration through the chassis at idle. Ford specifies this as a single use fastener that should not be reinstalled once removed, because the thread and clamp load are critical to keeping the strut located. The bolt carries a defined thread size and length, so the correct part matters for proper torque retention. Confirm this bolt against your Edge or MKX VIN or a Ford parts diagram before ordering so the thread, length and grade match the torque strut bracket on your vehicle.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov