Details

• Brand:

  

  

• SKU:

  W716075-S442

• Positions: Left, Right, Rear, Upper
• Other Names:

  Mount Bracket Bolt, Bolt

• Description:

  This is a genuine Ford lower control arm mount bolt, a bolt built on the HB2 base that secures a suspension control arm to its mounting point on the body or subframe. Ford dealer catalogs list it under several names including Lower Control Arm Mount Bolt and Suspension Control Arm Bolt, used at rear upper and lower arm locations. It clamps the control arm firmly in its mount so the suspension geometry stays correct and the arm pivots properly without shifting under cornering, braking, and road load. This is a single-use fastener: it must not be reused or reinstalled once removed, and a new bolt must be fitted whenever the joint is serviced so the correct clamp load and thread integrity are restored. You will find it used on Ford and Lincoln applications including Escape and MKC, with model years spanning roughly the early 2010s into the late 2010s. These are representative examples rather than a complete list. A loose, missing, or reused-and-stretched control arm bolt lets the arm shift in its mount, which causes knocking or clunking over bumps, a vague or wandering ride, uneven tire wear, and loss of alignment. Because this is a torque-sensitive, single-use suspension fastener, always replace it with the correct genuine bolt and torque it to the Ford specification. Confirm the correct bolt for your specific vehicle and position against your VIN before ordering, since suspension hardware varies by application.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov