Details

• Brand:

  

  

• SKU:

  W715823-S442

• Other Names:

  A/C Compressor Bolt, Compressor Assembly Mount Stud, Compressor Assembly Stud, Compressor Assembly Bolt, Compressor Assembly Mount Bolt, Compressor Stud, Pressure Tube Stud, Stud

• Description:

  This is a genuine Ford A/C compressor mount stud, a threaded stud built on the HT1 base, sized around M8 by 104 and M6 by 21.5 millimeters, used to mount the air conditioning compressor and related pressure tube to the engine. Ford dealer catalogs list it under several names including A/C Compressor Mount Stud, Pressure Tube Stud, and Compressor Bolt, and this part supersedes the earlier number W715823-S439. It threads into the engine or compressor bracket and provides a fixed shoulder so a nut can clamp the compressor or tube firmly in place against vibration. You will find it used across a wide range of Ford and Lincoln applications including Explorer, Flex, Fusion, Taurus, Police Interceptor Sedan, Continental, MKS, and MKX across engines such as 2.7L, 3.0L, 3.5L, and 3.7L, with applications spanning a broad range of model years. These are representative examples rather than a complete list. A loose, missing, or corroded compressor mount stud lets the compressor or pressure tube shift, which causes belt misalignment, noise, vibration, and possible refrigerant leaks at the connections. Because the compressor is belt-driven and refrigerant-charged, the mounting hardware must be installed correctly and torqued to the Ford specification. Confirm the correct stud for your specific vehicle and engine against your VIN before ordering, since A/C mounting hardware varies by application.

• Replaces:

  w715823s439

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov