Details

• Brand:

  

  

• SKU:

  W716575-S437

• Positions: Left Front, Left Lower, Right Front, Right Lower
• Other Names:

  Stabilizer Bolt, Front Reinforced Bolt, Lower Rail Bolt, Rocker Reinforced Bolt, Bolt And Washer Assembly Hex.Head

• Description:

  This is a genuine Ford steering wheel bolt, a hex-head bolt and washer assembly that Ford dealer catalogs list under the names Steering Wheel Bolt, Stabilizer Bolt, and Bolt and Washer Assembly Hex Head. It is a flanged fastener that clamps a steering or suspension component firmly against its mating surface and holds it in correct position under load. This is a single-use fastener: it must not be reused or reinstalled once removed, and a new bolt must be fitted whenever the joint is serviced so the correct clamp load and thread integrity are restored. You will find it used across a wide range of Ford and Lincoln applications including Explorer, Mustang, and Ranger, and it fits Lincoln Aviator, Continental, and MKX, in left front, left lower, right front, and right lower positions, with model years spanning roughly the early 2010s into the mid 2020s. These are representative examples rather than a complete list, since Ford shares this hardware across many platforms. A loose, missing, or reused-and-stretched bolt of this type lets the component it secures shift, which can cause noise, looseness, vibration, or compromised function depending on where it is fitted, and because these positions are steering and chassis related the integrity of the fastener matters for safe operation. Because this is a torque-sensitive, single-use fastener, always replace it with the correct genuine bolt and torque it to the Ford specification. Confirm the correct bolt for your specific vehicle and position against your VIN before ordering.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov