Details

• Brand:

  

  

• SKU:

  W716117-S437

• Positions: Left, Right
• Other Names:

  Turbocharger Mounting Bolt, Bolt

• Description:

  This is a genuine Ford turbocharger mounting bolt, a bolt built on the HB3 base used to secure the turbocharger to the engine on Ford EcoBoost applications. Ford dealer catalogs list it as a Turbocharger Mounting Bolt and Turbocharger Bolt. It clamps the turbocharger firmly to its mounting flange so the unit stays rigidly located against the high heat, pressure, and vibration of the exhaust and boost system. This is a single-use fastener: it must not be reused or reinstalled once removed, and a new bolt must be fitted whenever the turbocharger is serviced so the correct clamp load and thread integrity are restored. You will find it used across a range of Ford and Lincoln applications with the 2.7L and 3.0L EcoBoost engines including F-150, Bronco, Explorer, Aviator, Continental, and MKX, with applications spanning a broad range of model years. These are representative examples rather than a complete list. A loose, missing, or reused-and-stretched turbocharger mounting bolt lets the turbo shift on its flange, which causes exhaust and boost leaks, a ticking or hissing noise that changes with engine load, reduced boost, and possible damage at the mounting surface. Because this is a torque-sensitive, single-use, high-temperature fastener, always replace it with the correct genuine bolt and torque it to the Ford specification. Confirm the correct bolt for your specific vehicle and engine against your VIN before ordering, since turbocharger hardware varies by application.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov