Details

• Brand:

  

  

• SKU:

  W713095-S437

• Other Names:

  Exhaust Manifold Nut, Bracket Lock Nut, Nut

• Description:

  This is an exhaust nut used at the manifold-to-converter or front-pipe flange joint, cataloged as exhaust manifold nut and also as converter nut or front pipe nut depending on the diagram. It clamps the hot exhaust flange so the joint seals and does not leak combustion gases. A documented application is the 2.0L Fusion, C-Max, and Transit Connect, and the same base number carries across other Ford four-cylinder exhaust joints, listed here as examples rather than a finite vehicle list. Because exhaust nuts run through repeated heat cycles they tend to seize or back off, and a loose or missing nut produces an exhaust tick or leak, a check-engine light from upstream oxygen-sensor readings, and reduced converter efficiency. It is good practice to replace exhaust hardware rather than reuse corroded fasteners. Ford does not publish a single finite vehicle list for this universal fastener, so confirm fit for your specific engine and vehicle by VIN before ordering. This is a multi-year service part that fits across the model years of the listed Ford applications.

• Notes: Included with drive shaft. Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov