Details

• Brand:

  

  

• SKU:

  W716115-S900

• Other Names:

  Guide Bolt, Bolt

• Description:

  This is a genuine Ford engine intake manifold bolt, an M6 by 38 millimeter bolt built on the HB1 base used to secure the intake manifold and related components on Ford EcoBoost engines. Ford dealer catalogs list it under several names including Engine Intake Manifold Bolt, Intake Manifold to Pipe Bolt, and Timing Chain Guide Bolt, all referring to the same fastener, and this part supersedes the earlier number W503280-S900. It clamps the manifold or guide firmly to its mating surface so the joint stays sealed and located against vibration and thermal cycling. You will find it used across a range of Ford and Lincoln applications with the 2.7L EcoBoost engine including Fusion, Explorer, F-150, Continental, MKX, and Navigator, with applications spanning a broad range of model years. These are representative examples rather than a complete list, since Ford shares this hardware across the 2.7L EcoBoost family. A loose, missing, or stripped intake manifold bolt lets the manifold or guide loosen, which can cause an intake or vacuum leak, rough idle, a check-engine light, ticking noise, and possible misfires depending on where it is used. Because manifold hardware is torque-sensitive and is installed in a defined sequence, it must be torqued to the Ford specification to seal properly. Confirm the correct bolt for your specific vehicle and engine against your VIN before ordering, since manifold hardware varies by application.

• Replaces:

  w503280s900

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov