Details

• Brand:

  

  

• SKU:

  BKBOE-14

• Positions: Front, Rear, Left, Right
• Other Names:

  Motorcraft™ Caliper Bleeder Screw, Screw Bleed

• Description:

  This is a genuine Motorcraft brake bleeder screw, the small threaded valve that lets trapped air and old fluid be purged from a disc brake caliper or wheel cylinder during a brake bleed or fluid flush. Turning the screw open with a line wrench allows fluid to escape under pedal pressure so a firm, air-free pedal can be restored, then it seals against a machined seat when closed. This bleeder is a widely shared Ford service item used across many trucks and vans, including F-150 and F-250 applications spanning the mid-2000s through current production, which is why it is cataloged as a general Ford brake part rather than a single-vehicle piece. Drivers reach for this part when the original screw is rounded off, rusted solid, snapped during bleeding, leaking past the threads, or missing its rubber dust cap. It threads into the caliper bleeder boss and must be seated cleanly to hold pressure. The Ford catalog name is Brake Bleeder Screw. Always bleed with fresh fluid to the correct specification, tighten the screw to the proper torque so it seals without stripping the boss, and refit the protective cap to keep grit out of the passage.

• Notes: Included with caliper.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov