Details

• Brand:

  

  

• SKU:

  W711784-S300

• Positions: Left, Right, Rear
• Other Names:

  Brake Hydraulic Hose Caliper Bolt Washer, Washer

• Description:

  This is a Genuine Ford brake hose washer, the sealing washer used at a brake hose banjo fitting or hydraulic union to seal the high-pressure connection. It uses the standard Ford W-series washer base and is a multi-vehicle brake service part shared across many platforms rather than one model. Ford lists it as a Brake Hose Washer, and dealer parts data also shows it as a banjo washer or sealing washer. When this washer is reused, damaged or missing the brake fitting can weep or leak fluid, causing a soft pedal, reduced braking performance and a safety hazard, so a fresh washer is essential whenever the fitting is opened. The washer crushes slightly on torque to form the seal. Ford service procedures specify this fastener as single-use; it is torqued to a yield-controlled spec and must be replaced rather than reused once removed, so plan on a fresh piece any time the joint is disturbed. Ford does not publish a finite vehicle list for this universal hardware item, so confirm the exact application against your VIN before ordering so the size and seat match your brake fitting, and bleed the brakes after service.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov