Details

• Brand:

  

  

• SKU:

  F1SZ-10884-A

• Other Names:

  Temp Sender Unit, Engine Coolant Temperature Sender, Temp Gauge Sending Unit, Temp Gauge, Sender Assembly Temperature, SW2328

• Description:

  This genuine Ford engine coolant temperature sender is the gauge-circuit sending unit that threads into the engine and varies its electrical resistance with coolant temperature, driving the dash temperature gauge so the operator can monitor engine warm-up and detect overheating. It carries Ford engineering number F1SZ-10884-A and is cataloged as a Temperature Sender Assembly, serving a broad range of 1990-2003 Ford, Lincoln, and Mercury cars and trucks that use this common gauge sender. This gauge sender is a separate device from the coolant temperature sensor the engine computer uses for fuel and spark control, and it feeds only the instrument-cluster gauge. When the sender fails, the temperature gauge may read cold and never move, peg to full hot, read erratically, or fluctuate with engine speed, and a failing unit can also seep coolant at its threads. These symptoms often lead owners to suspect a thermostat or gauge fault when the sender is the actual cause. Installing a genuine Ford sender restores accurate gauge readings so a real overheating event is not masked by a faulty signal. Drain the cooling system below the sender port before removal, use a suitable thread sealant rated for coolant on installation, and confirm the correct thread and gauge calibration for your vehicle before ordering. This is the OEM replacement that returns the dash temperature gauge to reliable, accurate operation.

• Applications: F150. 1992-96, 1997-98 HD.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov