Details

• Brand:

  

  

• SKU:

  B7C-1201-A

• Positions: Front Inner Inner, Front Inner Front, Left Inner, Left Front, Right Inner, Right Front
• Other Names:

  Wheel Bearing, Inner Bearing, Front Wheel Bearing, Bearing, Wheel Bearings, Cup, Cone And Roller Bearing

• Description:

  This is the genuine Ford front wheel inner bearing, a tapered cone-and-roller bearing that supports the front hub as it rotates on the spindle and carries the cornering and vertical loads at the front wheel. Paired with its matching race, it must be cleaned, packed with grease, and set to the correct preload during a front hub service. It is a widely shared part used across a broad range of two-wheel-drive Ford, Mercury, and Lincoln vehicles, including Ranger, Explorer, Mountaineer, and Lincoln Town Car applications, which is why Ford catalogs it as a common multi-vehicle inner bearing rather than a single-model item. Drivers needing this bearing usually report a front-end growl or roar that changes with speed, a humming that worsens in turns, looseness or wobble felt at the wheel, or heat and roughness discovered when servicing the hub. A dry, pitted, or brinelled bearing left in service can seize and damage the spindle. Cataloged by Ford as the Wheel Bearing And Race Set, it should be installed with a fresh grease pack and the retaining nut torqued and adjusted to the specified running preload. Replace the matching race whenever the bearing is renewed.

• Applications: 1980-88. TORSION BAR - 2WD. TOWN CAR (TO 2002). CONTINENTAL & MARK VII.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov