Details

• Brand:

  

  

• SKU:

  W717065-S439

• Positions: Left Rear, Left Outer, Left Rear Outer, Left Lower, Right Rear, Right Outer, Right Rear Outer, Right Lower, Rear Lower Rear, Rear Lower Outer, Rear Lower Rear Outer, Rear Lower Lower, Lower Rear, Lower Outer, Lower Rear Outer, Lower, Rear Outer Rear, Rear Outer Outer, Rear Outer, Rear Outer Lower, Center Lower Rear, Center Lower Outer, Center Lower Rear Outer, Center Lower Lower, Rear Lower Outer Rear, Rear Lower Outer Outer, Rear Lower Outer Rear Outer, Rear Lower Outer Lower
• Other Names:

  Lower Control Arm Bolt, Suspension Control Arm Bolt, Bolt

• Description:

  The genuine Ford lower control arm mount bolt is a factory OEM suspension fastener that secures the lower control arm to its mounting point. It is a genuine Ford service bolt (M16 x 114mm) used across multiple 2013-2020 Ford platforms in the suspension mounting application, and is the correct-grade bolt for clamping the control arm pivot to the subframe or bracket. Suspension mount bolts carry significant load and must maintain proper clamp force to keep the control arm located and the wheel alignment stable; a corroded, stretched, or previously over-torqued bolt should always be replaced during suspension service. Because it is a genuine Ford component it is manufactured to the correct diameter, length, thread pitch, and material grade specified for this joint, ensuring proper strength and torque retention. This bolt is a single-use, torque-to-yield fastener: do not reuse the original bolt, always install a new one, and tighten to the factory torque specification and any specified angle, with the suspension loaded to ride height where required. Confirm the exact application and mounting location for your vehicle before ordering.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov