Details

• Brand:

  

  

• SKU:

  BCPZ-1107-A

• Positions: Left, Right, Front, Rear
• Other Names:

  Wheel Lug Stud, Wheel Bolt, Stud Wheel

• Description:

  This genuine Ford wheel stud is the M14 x 1.5 threaded stud that presses into the wheel hub or axle flange and provides the anchor onto which the lug nut clamps the wheel. Ford catalogs it under base 1107 as Stud - Wheel. It is a shared cross-platform fastener used across a wide range of Ford and Lincoln vehicles, including Ford Edge, Fusion, GT, and Mustang, and Lincoln Continental, MKX, MKZ, and Nautilus, spanning roughly 2015 through 2025 model years and engine configurations from 2.0L up to 5.2L. A wheel stud is replaced when its threads are stripped or cross-threaded, when it has been overheated or stretched by over-torquing, when it snaps during a tire change, or when a hub is being serviced and the studs are renewed as good practice. Drivers who need this part are often facing a lug that will not torque properly, a wheel that cannot be safely secured, or a broken stud discovered during rotation. Installing a fresh genuine stud restores correct clamping load and safe wheel retention. Proper installation presses the new stud fully into the hub flange until its splines are seated and the shoulder is flush, never relying on the lug nut alone to draw a partially seated stud home. After fitting, torque the lug nut to the vehicle's specification in the correct star pattern and re-check torque after the first miles of driving. Match the M14 x 1.5 thread and knurl to your hub before ordering to ensure a correct press fit.

• Notes: Included with hub assembly. Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov