Details

• Brand:

  

  

• SKU:

  CX-2718

• Other Names:

  Motorcraft™ M.A.P Sensor, Motorcraft™ Manifold Absolute Pressure Sensor, Motorcraft™ Map Sensor, Motorcraft™ Sensor, Motorcraft™ Pressure Sensor, Motorcraft™ Turbocharger Boost Sensor, Sensor Assembly

• Description:

  This Genuine Ford Motorcraft Manifold Absolute Pressure (MAP) sensor monitors intake manifold pressure and reports it to the powertrain control module, which uses the signal to calculate air load and precisely meter fuel and spark for smooth running and clean emissions. It is a widely shared Ford service sensor used across many gasoline and EcoBoost applications from roughly 2012 through 2025, including popular light trucks, SUVs and cars, so a VIN or model check confirms the exact application before installation. The sensor allows the engine management system to compensate for altitude, throttle changes and turbocharger or manifold vacuum so the mixture stays correct across the full operating range. When this sensor drifts or fails, drivers commonly experience a check engine light with manifold-pressure trouble codes, rough or unstable idle, hesitation, surging, reduced power, hard starting and lower fuel economy, because the module is working from a bad pressure reading. As the Motorcraft OEM component it matches Ford's original electrical connector, signal calibration and mounting so it drops in without adapters and reads true from the first start. Ford catalogs this as the Manifold Absolute Pressure Sensor. During installation, inspect the connector for corrosion or looseness, seat the sensor squarely against its port or grommet, and clear stored codes afterward so the control module establishes a fresh baseline. This direct replacement restores accurate pressure sensing and factory driveability.

• Notes: Included with vacuum hose. Included with hose & tube assembly.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov