Details

• Brand:

  

  

• SKU:

  CX-2695

• Other Names:

  Motorcraft™ Emission Check Valve, Motorcraft™ Purge Control Valve, Motorcraft™ Purge Solenoid, Motorcraft™ Secondary Air Injection Solenoid, Motorcraft™ Purge Valve, Motorcraft™ Solenoid Valve, Valve Assembly

• Description:

  This Genuine Ford Motorcraft vapor canister purge solenoid is the electronically controlled valve in the evaporative emissions system that meters stored fuel vapor from the charcoal canister into the intake manifold to be burned during normal running. The powertrain control module opens and closes this solenoid on a duty cycle so vapors are purged cleanly without upsetting the air-fuel mixture, keeping fuel-tank fumes out of the atmosphere. It is a widely shared Ford service part used across many gasoline models from roughly 2011 through 2023, so verify the exact application by VIN or model before installing. When a purge solenoid sticks open, sticks closed or leaks internally, the result is typically a check engine light with evaporative or purge-flow trouble codes, a failed emissions test, rough or stalling idle, hard starting after refueling, a faint fuel odor, or a small-leak code that will not clear. Because it is the Motorcraft OEM valve, it matches Ford's original electrical connector, flow calibration and port fittings so it installs directly and seals correctly. Ford catalogs this as the Vapor Canister Purge Solenoid, also referred to as a solenoid or valve assembly. During service, inspect the connected vapor lines for cracks or loose connections, make sure the solenoid clicks when actuated, confirm it holds and releases vacuum as designed, and clear stored codes after replacement so the module can rerun its evaporative monitor. This direct-fit valve restores proper vapor management and emissions compliance.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov