Details

• Brand:

  

  

• SKU:

  W715869-S439

• Other Names:

  Bolt And Washer Assembly Self Loc

• Description:

  This is a genuine Ford clutch pressure plate bolt, a self-locking bolt and washer assembly built on the 6379 base that secures the clutch pressure plate to the flywheel on manual-transmission applications. Ford dealer catalogs list it as a Clutch Pressure Plate Bolt and Bolt and Washer Assembly Self-Locking. It clamps the pressure plate tight against the flywheel so the clutch cover and disc rotate together and the clamping springs hold the disc reliably. This is a single-use self-locking fastener: it must not be reused or reinstalled once removed, and a new bolt must be fitted whenever the clutch is serviced so the locking feature and correct clamp load are restored. You will find it used on Ford applications including Mustang built in the early 2010s up to a defined production date, with applications spanning that model range. These are representative examples rather than a complete list. A loose, missing, or reused-and-failed pressure plate bolt lets the pressure plate shift on the flywheel, which causes clutch chatter, slipping or grabbing, vibration, noise, and in severe cases the pressure plate working loose. Because this is a torque-sensitive, single-use self-locking fastener in the driveline, always replace the full set with the correct genuine bolts and torque them to the Ford specification in the proper sequence. Confirm the correct bolt for your specific vehicle and transmission against your VIN before ordering, since clutch hardware varies by application. This is a multi-year service part that fits across the model years of the listed Ford applications.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov