Details

• Brand:

  

  

• SKU:

  W716324-S300

• Other Names:

  Ring Sealing

• Description:

  This is a genuine Ford oil filler tube seal, a consumable rubber sealing ring built on the HR1 base, about 31 millimeters across, that seals the engine oil filler tube to the engine on Ford diesel applications. Ford dealer catalogs list it under several names including Oil Filler Tube Seal, Oil Inlet Pipe Sealing Ring, and Engine Oil Filler Tube Sealing Ring, and it is supplied with the oil filler tube. It seats in a groove and is compressed when the tube is installed, forming an oil-tight seal that keeps engine oil contained at the filler connection. This is a single-use consumable seal: it should be replaced rather than reused whenever the filler tube is removed, because a compressed or aged ring will not seal reliably a second time. You will find it used on Ford Super Duty trucks including F-250, F-350, F-450, and F-550 Super Duty with the 6.7L Power Stroke diesel engine, with applications spanning a broad range of model years. These are representative examples rather than a complete list. A worn, cracked, or improperly seated seal causes an oil leak at the filler tube, which can lead to oil weeping or dripping, a burning oil smell, and over time a low oil level. Because it is an inexpensive consumable that protects against oil leaks, it is standard practice to fit a new seal during any filler tube service. Confirm the correct seal for your specific vehicle and engine against your VIN before ordering, since diesel engine seals vary by application.

• Notes: Included with oil filler tube.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov